iwan.hoogendoorn
Domotica · · 4 min read

Power measurement

As an IT (networking) guy, I have a lot of computer equipment that is using a lot of power. One of my friends once said to me if they had something like the energy measurement police and you where not allowed to use more than a specific amount of energy, they would probably arrest me. It made me wonder how much power I am actually using. To measure the amount of kWh that I am actually using per hour, day, weeks, months or even years I am using equipment of RFXCOM.

Equipment

The equipment and software to measure my power is:

The picture below gives you an illustration of how this should work.

What basically the story behind the picture is is that:

Because my CT1021 energy meter is using an IR LED I needed to make a small adjustment to the Reflective-Optical sensor. (Open the 3,5 jack plug and cut the white wire (leave the copper and blue untouched!)

Sensors

Usualy the  Reflective-Optical sensor is used for other kind of meters with a rolling counter with a small mirror on it. When the mirror shows up the Reflective-Optical sensor will count that as 1 pulse and 1 just like 1000 pulses on my CT1021 means that I used 1 kWh of power, it will probably mean a specific amount of water or gas is used.Some people have a energy meter with a normal blinking light. This people need a different sensor … the Photo Sensor.

Charts

Well if everything is working as it should and Homeseer 2 is receiving the information and RFXCharts is installed and configured according to the guide you should see some charts.

My hourly power chart looks like this at the moment:

I hope you enjoyed my explanation on the energy measurment part of my overall domotica project …

Energy Costs of my Energy provider

Measuring power or energy made me wonder how much energy actually cost, so I made some phonecalls and checked out my online account of the energy provider.

It seems that I have something called dubbeltarief which means I pay 2 amounts:

  • daluren 23:00 - 07:00 (weekends and nighthours and some public hollidays) = laagrarief
  • normal hours 08:00 - 23:00 (weekdays) = normaaltarief

The total costs comes to:

  • laagtarief = €0,2051 per kWh
  • normaaltarief=  €0,2482 per kWh

This amount is including the energy tax fee and the 19% VAT fee but exludes the Vastrecht fee and Transport fee.There are also other amounts I need to pay which comes in monthly or yearly:

  • Vastrecht = €1,99 incl 19% VAT p.m (€23,88 incl VAT p.y.) (The payment for invoice process and paymentprocess costs)
  • Transport fee = €182,46 incl. 19% VAT p.y. (The payment for a 3-phase connection to the energy provider (3 x 25A)

total extra yearly costs are:€23,88 + €182,46 = € 206,34

In 2010 ( 7 March 2010 to be exact) I switched from my old energy provider (Eneco) to the the new one (E-ON) and my current energy price is: vasttarief €0,0833 per kW (vasttarief = 1 steady fee for all hours including evening and weekends)

Measurement per device

Currently my PC is using arround 222 Watt of power. This was measured with a different system PLUGWISE.

222 Watt = 0,222 kW (222 W / 1000)

0,222 kW = 5,328 kWh for 1 whole day (0,222 kW x 24 hours)

5,328 kWh x €0,0833 = €0,4438224 per day (24 hours)

€0,4438224 x 30 days = €13,31 per month to keep my PC up and running (day and night)

My 4 x 24” monitors (132 Watt) would’ve cost me €7,92 if they where on 24 hours a day … but they are not because they go in sleeping mode when I am not sitting behind my PC.

Here is a screenshot of my current power usage (and the power usage from the beginning of the day) for the PC:

Here is a screenshot of my current power usage (and the power usage from the beginning of the day) for the 4 x Monitors:

Originally published on the old wiki at /index.php/Power_measurement.